WiFi WLAN Network Sevices

Deployment of a wireless network requires careful planning. Business requirements and objectives need to be evaluated and a site survey must be undertaken to determine possible sources of interference. WiFi Networks can be difficult to implement in high interference areas, be incompatible with existing equipment and can open up security risks. WLANs are best used in addition to – rather than a replacement to wired networks. Our consultants will assure proper planning when implementing your wireless network. The complexity of your network will vary depending on the obstacles within and the size of your facility.

Common applications include:

  • Business customer aggregation
  • Enterprise/Campus Inter-building Connectivity

Wireless / WiFi Network Types Include:

  • 802.11g
  • 802.11b
  • 802.11n
  • 802.11a
  • Wireless Mesh

 

 

Shoreworx Wireless/WiFi Solutions and Installations

  • Enterprise WiFi Hotspots
  • Outdoor Broadband Wireless / WiFi (including municipal and rural wireless)
  • In-Building Cellular and Distributed Antenna Systems (DAS)
  • Wireless / WiFi for Multimedia (business telephone / VoIP, CCTV, hand held scanners, point of sale / POS, digital signage, paging and music systems, etc.)
  • Wireless / WiFi for Multimedia (business telephone / VoIP, CCTV, hand held scanners, point of sale / POS, digital signage, paging and music systems, etc.)
  • Multi-Service Mesh Networks
  • Point to Point Wireless
  • Point to Multi-Point Wireless
  • Fixed Wireless Access
  • Mobile Wireless Access
  • Wireless Video Surveillance
  • Public Safety Solutions

 

RF Tests & Site Surveys

A site survey is always performed first. This is a physical survey of the customer\’s premises to locate the best possible places to install access points and ensure 100% wireless coverage and optimum performance.

Before installing any wireless devices we perform a radio frequency (RF) test in order to better understand the behavior of radio waves within a facility. This is recommended because various obstacles such as doors, walls, elevator shafts and people might affect the radio frequency pattern, causing it to be irregular and unpredictable. Even if you are using omni-directional antennas, radio waves do not travel the same distance in all directions. The RF test can also detect any radio interference that might come from other sources and could affect the performance of the wireless LAN negatively. The ultimate goal of the site survey and RF test is to help determine the number and placement of the access points.

Access Points – WLAN Installation

Shoreworx Communications will integrate the WiFi system into your current network as well as install all the required wireless equipment and certify its operation. All cabling and power runs should be done and tested prior to the installation of access points.

 

Below is a list of activities that one might expect during an installation:

  • Mounting of access points
  • Installation of enclosures on case-by-case basis (physical security)
  • Mounting of antennas
  • Connection of antennas to access points
  • Connection of Backbone LAN to access points
  • Connection of power to access points
  • Installation and connection of remote power system
  • Verification of coverage

Configuration of access points and hardware will include:

  • Proper firmware level
  • Radio information (SSID, channel, bit rate)
  • IP addresses
  • Verification of backbone connectivity

Advantages of WiFi Networks / WLANs

Mobility

The most obvious and significant advantage of WiFi networks. Workers can access shared resources without looking for a cable and a place to plug in.

Range of coverage

Coverage of a WLAN node can be extended by the use of access points.

Ease of use

Users need very little information to take advantage of a WLAN because it is transparent to a user’s network operating system

Installation speed and flexibility

Installation of a WLAN system can be fast and easy and can eliminate the need to pull cable through walls and ceilings. Furthermore, wireless LAN enables networks to be set up where wires might be impossible to install.

Scalability

Wireless networks can be designed to be extremely simple or complex. Wireless/WiFi networks can support large numbers of nodes and large physical areas by adding access points to extend coverage.

Reduced cost of ownership

Particularly in dynamic environments requiring frequent modifications\’ thanks to minimal cabling and installation costs per device and user. WLANs simplify moving, additions, and changes, the indirect costs of user downtime and administrative overhead are reduced.

Contact Shoreworx today for a free site survey / estimate
to see if our wireless solution is the right fit for your business.

440.808.8448

About Author: Shannon

Leave a Reply

Your email address will not be published. Required fields are marked *

No Spam! * Time limit is exhausted. Please reload CAPTCHA.